Process Engineer Jobs

Job Title: Director - Process Engineering Company: Location: Omaha, NE Description: Lead a team of Engineers to deliver commercially available technical solutions and provide both operational and engineering focused scope recommendations based on knowledge, experience, and best industry practice. Be and be recognized as one of the company's technical experts regarding process system equipment and design. Manage process engineering resources across a portfolio of projects to develop project scope identification documents, supporting conceptual materials, detailed budget estimates, and risk and alternative assessments using standardized templates in advance of deployment by Platform project execution teams. Oversight responsibility for performance of recommended processing systems and the technical accuracy and thoroughness of the scope defined. Support the innovation process through collaboration with Research, Quality and Innovation teams. Guide investigation of emerging commercially available processing equipment and technology in support of developing competitive advantage to ConAgra within the discipline of process engineering. This position directly supervises a team of corporate process engineers (Junior, Senior and Principal)supporting the Grocery, Refrigerated, Snacks and Frozen Food Platforms. Position Responsibilities 1. Works with all Platform engineering leadership in support of developing annual and 3 year capital plans by recommending processing systems improvements and solutions that are proven in both concept and performance. 2. Co-ordinates the development of enterprise wide standards and guidelines for process equipment and process components. 3. Coordinates the development of Front-End-Loading packages that are clear, concise, and reflecting thorough progressive due diligence to ensure project success. Works with other engineering disciplines to ensure FEL's follow a consistent format, data synchronization, and clear boundaries with flawless transcription among the various disciplines. 4. Reviews FEL packages for accuracy, completeness, and operational effectiveness including but not limited to : Technology assessment and recommended solution including plant, ConAgra, and industry best-in-class practices Physical location and general arrangement placements (drawing level) Infrastructure requirements and needs assessment Capital / Expense estimates and cash-flow schedule Schedule to complete relative to an assumed approval date Equipment / System Performance criteria Identification of Alternatives, Pre-requisites, Risks, and Opportunities 5. Develops and drives intra-platform and cross-enterprise programs focused on improving process system capacity, capability, and sustainability while generally reducing total delivered costs. 6. Keeps current with latest food processing technology and commercial applications of this technology. 7. Keeps current with latest and emerging industry regulations and codes relative to processing equipment system design and operation 8. Provides technical and economic feasibility to other groups within the Company that are focused on improvements to the current sate and developing competitive advantages against ConAgra's peer set. Position Qualifications A BS or MS degree in Engineering (i.e. Chemical, Mechanical or Agricultural) with a Food Engineering emphasis is required in addition to 10 - 15 yrs practical experience in food manufacturing or processing technologies. Management experience in a corporate manufacturing environment required This position requires a broad understanding of Food processing equipment / systems and manufacturing applications. Excellent leadership qualities, verbal and written communication skills, and technical analysis and problem solving skills are required. Proven ability to work across all levels of a matrix organization. To apply for this position, please Click Here

Job Title: Manufacturing Process Engineer Company: Biotronik (Micro Systems) Location: Portland, OR Description: Founded in 1963, BIOTRONIK, Inc. is a pioneer in developing innovative technologies and medical devices that save and enhance the quality of life for millions of individuals living with cardiovascular conditions. With a growing base of over 3,600 employees worldwide, we're continually looking for talented professionals with the passion and drive for excellence to join our mission. Micro Systems Engineering, Inc., a wholly owned subsidiary of BIOTRONIK Gmbh., Inc. now has an opportunity for a Manufacturing Process Engineer. POSITION SUMMARY: Specify and implement process control procedures and introduce new processes and equipment to improve production efficiencies and support manufacturing as well as company objectives. Engineer will use proven problem solving methodologies to provide technical support to manufacturing needs. Interacts with product design and development personnel to ensure that processes and designs are compatible. Establishes operating equipment specifications, improves manufacturing techniques, and production yields. RESPONSIBILITIES: Equipment Management Identify automation, semi-automation, and handling improvement opportunities Define requirements and specifications for equipment Model and simulate manufacturing flows Specify, evaluate, select, and implement new equipment Process Management Optimize equipment performance for efficiency and capacity Lead or assist on manufacturing process development Information Technology Integrate Manufacturing Execution System (MES) with manufacturing equipment Develop and deploy performance information systems based on MES or interface software Qualification Specify and execute installation, operation, and production qualification plans Quality Assess, specify and deploy process control procedures SKILL REQUIREMENTS Automated Assembly Equipment Control systems Vision systems Motion control Machine programs Documentation Development Operation requirements specifications Standard operating procedures Qualification procedures Project Management Proposal development Create and manage project plans Develop and present proposals to peers and management Problem Solving Skills Design of Experiments Understanding of problem solving methodologies Communication Skills Excellent verbal and written communication skills. Ability to work with all levels of the Company Strategic Development Skills Equipment and process roadmaps Ability to identify equipment / automation solutions Ability to contribute to manufacturing strategy TRAVEL REQUIREMENTS: Periodic travel required POSITION REQUIREMENTS: B.S. Mechanical Engineering or equivalent. Five+ years experience in electronics manufacturing (SMT preferred) Experience in automated equipment implementation and support For consideration please send your resume to: Register to View For more information on Biotronik, Inc. please visit our website at www.biotronik.com

Job Title: Process Engineer Company: Rogers Corporation Location: Carol Stream, IL Description: Rogers Corporation (NYSE: ROG), with over $450 million in sales, is an assertive, agile enterprise, coordinating our strengths and integrating our resources to enhance our role as a world leader for the skyrocketing demand for computers and wireless communication products and services. To keep up with today’s demands, Rogers needs a progressive workforce to develop and implement specialty, state-of-the-art products. Rogers provides excellent opportunities for those seeking to grow with a global, results-oriented company. Support manufacturing processes, improve capability, and work to make processes more effective. ESSENTIAL FUNCTIONS: Maintains safety, product quality, and manufacturing effectiveness through daily troubleshooting and resolution of process difficulties Optimizes manufacturing processes to provide sustainable gains in cost effectiveness and product performance through capital projects, statistical analysis, designed experiments, and procedural changes Works with customers to resolve technical/quality issues and provide special products Participates in multi-functional teams (industrial staff, R&D, marketing, six sigma, process improvement) to resolve problems and develop new products. Leads where appropriate Starts up new products and equipment (supervises installation, troubleshoots initial production, ensures new processes and products meet requirements, documents and transfers to production) Train supervisors, co-workers and hourly personnel

Job Title: Photolithography Process Engineer Company: Confidential Location: Columbia, SC Description: Thin film or semiconductor process engineer with 3 years of hands on experience in back end semi-conductor processing. Responsible for Photoligraphy Process. Also assist in other semi conductor processing. This is a hands on position with complete tool responsibility. Facility is in a growth phase requiring transitioning processes from development, and ramping to full production of numerous products simultaneously. Candidate will define and practice statistical process control. Team oriented environment with cross training and additional responsibilities dependant on candidates qualifications.

Job Title: Process Engineer Company: Location: Cincinnati, OH Description: Rohm and Haas a highly innovative, growing global specialty polymer and chemical company building on an ever-broadening technical base has a great opportunity for you. At Rohm and Haas imagination means exploring the frontiers of technology – pushing beyond conventional boundaries to create products once thought impossible. For more information, please visit our website at www.rohmhaas.com . Let us Imagine the Possibilities with you. Please join our expanding and exciting international company. Position Description: BS or MS Chemical Engineering with 2+ years chemical industry experience. Facility primarily manufactures organic tin stabilizers for plastics industry. Process engineering support of assigned production units including: monitoring, troubleshooting, process upgrades, quality improvement, de-bottlenecking, root cause analysis, and process design. Work with research and development to adapt production units for manufacture of new or modified products. Provide the front end loading process engineering (conceptual design, P&ID's, develop/evaluate options, materials of construction, justification), for projects. Manage equipment check out, operator training, procedures, and start-up of projects or system changes. Initiate and develop process improvements for EHS issues, cost reduction, reliability, cycle time or throughput, and product quality. Lead or assist with Process Hazard Analysis, EHS reviews, risk assessments, and change management of assigned units. Owner/ responsible for process safety information and P&ID's on assigned units. Work with controls engineer on DCS control issues or upgrades on production units. Other special assignments as requested. Performs all duties according to company policies with regard to safety, quality and waste management. Provides input and participates in capital and expense budgeting process. Rohm and Haas Company is an Equal Opportunity Employer and values diversity worldwide

Job Title: Process Engineer - Magnetics Company: Location: Pullman, WA Description: The Opportunity: Schweitzer Engineering Laboratories (SEL) seeks a Process Engineer - Magnetics to join a dynamic team that provides support to accomplish corporate product quality and reliability objectives. The ideal candidate will be able to assist management to specify, evaluate, recommend and conduct acceptance tests on magnetics assembly process equipment and materials, as well as train manufacturing staff in assembly processes. The duties include: writing and conducting experiments; developing process controls using statistical methods such as Statistical Process Control(SPC), and Process Capability(Cpk) on related assembly equipment. If you have a proven history of leadership in developing manufacturing processes in a team oriented organization, and you are a senior level professional who expects the best, we invite you to consider joining our industry leading technical team. Process Engineer - Magnetics Responsibilities: Develop, document, implement and sustain assembly processes. Improve yield, efficiency and capacity of processes in accordance with strategic objectives. Develop and/or conduct Design of Experiments. Evaluate new products for manufacturing compatibility per established DFM guidelines. Assist management to specify, evaluate, recommend, and conduct acceptance tests on assembly process equipment. Train manufacturing staff in assembly processes. Follow and improve Process Engineering processes. Qualifications: B.S. in Engineering or equivalent combination of education and experience Two years experience in magnetics process development, documentation, maintenance, and improvement in an electronics manufacturing company Familiarity with IPC, JEDEC, IEEE and Belcore industry standards Knowledge of statistics as applied to process capability measurements Excellent speaking and writing skills; ability to train production staff Ability to work cooperatively in a team environment Ability to learn new skills and assume new responsibilities Preferred Qualifications: Thorough understanding of the materials used in the assembly of various types of transformers Ability to lead a team Project management skills

Job Title: Process Engineer Company: Location: Knoxville, TN Description: As part of Management Recruiters International, The Colonial Group specializes in the placement of outstanding talent in Lean Manufacturing environments for the Pharmaceutical, Food & Beverage, Specialty Chemical, and affiliated industries. Our clients understand that our decades of industry experience give us unique insight and access to top talent at all levels. The Colonial Group is a nationally recognized, award-winning firm dedicated to helping both clients and candidates join together to form a mutually beneficial relationship. Our client is a well-known, international leader in the industry that has a track record of profitability, consistent growth, and promoting from within. Their mission to deliver quality products is driven by an entrepreneurial spirit and a commitment to treat people as their most valuable asset. This organization continues to be listed as a “Best Employer to work for” year after year. We have been engaged to identify and recruit top talent who will make meaningful contributions to their organization. If you are prepared to work in an exciting and rewarding environment, we look forward to considering your experience and qualifications. Process Engineer Responsibilities: Ø Drive process improvement to enhance quality, safety, customer satisfaction, production standards, and cost efficiencies Ø Investigate and identify new technology requirements for ongoing improvements, including automation improvements, machine upgrades, and other technical improvements Ø Optimized process conditions to increase efficiency during new product launches Ø Implement innovations, improvements, and cost reduction projects Ø Evaluate, develop and execute a broad spectrum of projects including project planning, feasibility studies, design, cost estimation preparation of appropriation requests Ø Provide technical/engineering support to production and other plant functions Ø Assist in the development of project budgets, schedules, and timetables Ø Assists with the selection of new equipment, sets up new equipment, and trains staff in the proper operation of equipment Requirements: Ø BS in Engineering or similar discipline. BS Chemical Engineering or Materials Science is a plus. Ø Minimum of 2-4 years of experience in a Manufacturing environment within Engineering for Plastics / Polymers / Thin Films / Printing / Laminating or similar disciplines Ø Strong mathematical and analytical skills required; Ability to read, analyze and interpret statistical data and ability to read and comprehend technical drawings and specifications Ø Familiarity with Six Sigma with a diversified background in Continuous Improvement Methodologies including: Lean, Kaizen, 5S, TQM, SPC, FMEA, TPS, TPM Resumes forwarded as a Microsoft WORD document attachment are preferred. Please reference job code 2444 with your response. Responses should be forwarded to mailto: Register to View Word Bank Thin Film, flexible plastic, high barrier laminate, multilayer laminate, high barrier film, Six sigma, black belt, green belt, lean, 5S, kaizen, DMAIC, ISO, blow molding, injection molding, stretch blow molding, extrusion, twin screw extrusion, equipment, manufacturing, process, analytical, SPC, continuous improvement, continuous production, process engineer, CI engineer

Job Title: Senior Process Engineer Company: Location: Memphis, TN Description: Senior process engineering position with a great company in a beautiful part of Tennessee.

Job Title: SENIOR CHEMICAL PROCESS ENGINEER Company: Powerspan Corp Location: Portsmouth, NH Description: We are currently looking for a Chemical Process Engineer to join our team in our Portsmouth, NH offices. This senior-level, non-management position will provide engineering support and oversight for several new and ongoing projects. The individual will be responsible for developing process scopes and schedules for projects (conceptual through detailed engineering ), leading the design of Powerspan processes, assisting with process hazard reviews, mentoring junior engineers and reviewing subcontractor work.

Job Title: Site Process Engineer Company: Aegis Worldwide Location: Indianapolis, IN Description: Our client is a small to medium sized pharmaceutical company in Indianapolis that is looking for a Site Process Engineer. This is a great opportunity for someone that wants to come in and make an immediate impact on a facility. There is significant room for upward mobility, as the current and previous Site Managers joined the company as a Site Process Engineers. Hands on process engineering experience is essential. This person must have the ability to analyze, recommend and implement improvements on new and existing processes. Chemical or Mechanical Engineering degree is preferred. The Site Process Engineer will insure products consistently meet customer expectations. This is achieved by developing a deep understanding of current process technologies. They will work collaboratively with associates from Operations, Quality Control, Maintenance, Logistics, Global Engineering, and New Product Development to maintain and improve the integrity of existing processes and develop new processes to increase production efficiency and reduce cost. Develops an in-depth understanding of manufacturing processes, equipment specifications, product specifications, product applications and their interrelationships at the manufacturing facility. Leads multi-disciplinary teams and interacts closely with Manufacturing, Quality Control, Maintenance and Global Engineering on improvements or future product line extensions. Responsible for process optimization from identification, concept, implementation, documentation and operator training. Writes and performs validation IQ/OQ/PQ protocols and reports to meet cGMP regulations. Dry Powder, Automation, Lean Manufacturing, ISO 9000 and AutoCad experience desired. Trouble shooting and documentation experience, including P&IDs, Blue Prints, Schematics.