Manufacturing Engineer Jobs in Maryland

Job Title: Manufacturing Engineer I Company: Haemonetics Location: Baltimore, MD Description: Manufacturing Engineer ILocation: PA-LeetsdaleRequisition #: FY10-LEETS-24# of openings: 1DescriptionResponsible to develop and implement changes to product design and/or to the manufacturing process to achieve significant quality, efficiency or cost improvements. This requires participation in new product development programs, identifying design-for-manufacturability issues and ensuring these issues are addressed prior to release, including: Review and chart customer and in process defect data and identify highest frequency and most critical failure modes. Develop corrective actions to resolve issues and implement changes.education:Bachelors degree required. 0-2 years experience in manufacturing environment.

Job Title: Manufacturing Engineer Company: Aerotek Contract Engineering Location: Baltimore, MD Description: We are urgently seeking a Manufacturing Engineer in Pittsburgh, PA to lead efforts in designing, implementing, coordinating and managing efficiency of production lines.Requirements:--Versed in SPC, Lean, Kaizan, and 6 Sigma methodology--Develop plans and designs for manufacturing processes and procedures used on the production floor--Maximize efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization--Be familiar with a variety of workflow concepts, practices, and procedures--Experience with interfacing with customersEducation/Experience:--MS/BS in Mechanical, Electrical or Manufacturing Engineering (preferred), or other related engineering discipline--5 years related job experienceInterested candidates please contact Michelle Lund at the email address below with an attached resume.Join Aerotek CE(SM), one of the leading providers of engineering and engineering support professionals in North America. Due to our growth, we're constantly on the lookout for qualified professionals to place in contract, contract-to-hire, and permanent placement positions across a number of different industries. We know it's more than just your day-to-day responsibilities that can make or break a job. It's the support you get. That's the reason Aerotek CE offers a variety of benefits including medical, dental, optical, 401k, and many more. Don't put your career in the hands of just anyone, put it in the hands of a specialist. Join the Aerotek CE team! Allegis Group and its subsidiaries are equal opportunity employers and will consider all applications without regard to race, marital status, sex, age, color, religion, national origin, veteran status, disability or any other characteristic protected by law.

Job Title: Manufacturing Engineer Company: Gilbarco Inc. Location: Baltimore, MD Description: Manufacturing EngineerLocation: Altoona, PADescriptionPurpose of Position: Performs engineering/technical assignments using manufacturing engineering practices and principles in a fast paced lean manufacturing environment. Designs and implements manufacturing methods and processes that support product quality and productivity goals and objectives for both new and existing products.Key Responsibilities: .Provides engineering support by troubleshooting problems and implementing timely solutions to maintain continuity of production flow..Participates as an active leader on New Product Development projects. Interfaces with other departments during development process to ensure design for safety, quality, manufacturability, and cost position..Designs manufacturing processes within schedule and budgetary parameters..Monitors and debugs production and test methods / procedures to ensure system efficiencies..Prepares design concept drawings, cost estimates and implementation schedules for production equipment and tooling..Reviews and recommends changes to mechanical drawings and process documentation..Interfaces with other manufacturing departments to address and resolve engineering issues..Interfaces with vendors and outside sales personnel to evaluate, cost estimate, and select purchase parts and production equipment..Leads and participates in Monthly Improvement Workshops (Kaizens)..Provides necessary support within the factory and department to meet safety, quality, delivery and cost goals..Demonstrates ability to perform as a self-starter to drive continuous improvement efforts in areas of responsibility. Continually seeks new opportunities to improve both processes and products.Measure of Perform. (KPI):Required Qualifications:Required Success Factors: .Bachelor's degree in Mechanical Engineering or a related field..Experience in a lean manufacturing environment preferred, but not required..Knowledge of AutoCAD is preferred.. SMT or LabView experience preferredPreferred Qualifications:

Job Title: Electronic Manufacturing Engineer Company: Johns Hopkins University Applied Physics Laboratory Location: Laurel, MD Description: Introduction The Johns Hopkins Applied Physics Laboratory (APL), a national leader in scientific research and development, located midway between Baltimore and Washington, DC is seeking an Electronic Manufacturing Engineer. Responsibilities Provide on-floor technical and process leadership within the electronics assembly area including implementation of processes that maximize efficiency, enhance service and improve hardware quality. Identify and lead implementation of new and enhanced electronic assembly capabilities. Serve as a manufacturing expert as part of a team designing electronic assemblies. Develop, implement and improve build processes for mixed technology PWA's, electronic assemblies, cables and harnesses for flight qualified applications. Serve as the manufacturing expert as part of a team designing electronic assemblies. Perform analyses as required to ensure that the hardware will meet the sponsor's requirements. Recommend new materials and processes as required. Generate, review/revise standard operating procedures and work instructions. Analyze process trends and metrics and design experiments to improve reliability, quality and improve cycle times. Qualifications Required: BS degree or equivalent in a technical field (EE, ME, Materials Science, etc.) and 10 years of increasingly responsible work in an electronics manufacturing environment, particularly in a high mix, low volume facility. Prior technical leadership experience. Proven process development and improvement skills with broad knowledge of solder joint characteristics, PWA processing tools and materials. Knowledge of SPC and DOE. Ability to lead multiple electronics technicians. Excellent written and verbal communication skills. Demonstrated customer service skills. Excellent teaming skills. Desired: Advanced degree in a related technical field. Formal supervisory experience. Experience in operating in an ISO-9001and/or AS-9100 environment. Experience processing high reliability electronics e.g., spacecraft. Special Work Conditions Most work will be performed in a clean room environment. Benefits APL offers a comprehensive benefits package including a liberal vacation plan, a matching retirement program, significant educational assistance, a scholarship tuition program for staff with dependents, and competitive salaries commensurate with skills and experience. How to Apply: Go the the JHU/APL Employment Page link below and select "Search and apply". Then, select "Advanced Search". Enter the Reference Code number below into Job Opening ID # box and click the Search button. Select job for Job Basket. Click Apply for Job(s) in Job Basket button and follow the instructions to complete the on-line application process. Job Opening ID Number: 110697 Click Here for our Employment Page Johns Hopkins University Applied Physics Laboratory Equal Employment Opportunity Johns Hopkins University Applied Physics Laboratory is an equal opportunity/affirmative action employer that complies with Title IX of the Education Amendments Act of 1972, as well as other applicable laws, and values diversity in its workforce.   See all jobs in Laurel MD

Job Title: Unmanned Aerial Vehicles - Lead Manufacturing Engineer Company: FF & C Management Location: Cambridge, MD Description: ***  Oversee process development, tooling, capital and R&D projects.***  Chair Material Review Board***  Coach engineers, support and production personnel.***  Interface with customer and between Program and the plant***  Lead technical problem resolution and continuous improvement of processes, materials and technology.***  Assist with supplier technical issues.High growth visible position with top company. Salary $75,000 to $115,000 plus bonus plan; company paid full family coverage medical, dental, prescription and vision; matched 401(k); stock; tuition reimbursement and more.For complete details contact Mr. Borges at Register to View ext 242Or submit resume online at:http://dmc9.com/bxb/app.asp Or email Register to View ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid relocation to another venue.  CONSIDERED EXPERIENCE INCLUDES:  Composite Aerostructures Process Engineer Industrial Engineer Manufacturing Engineer Chemical Engineer Mechanical Engineer Lamination Autoclaves Polymers Airframes Fuselage Aircraft UAV Kevlar Advanced Materials Plastic Resins Northa American Job Bank www.najobbank.com Lean Six Sigma Quality Engineer Continuous Improvement Kaiban Kaizen Fabrication Tooling Aircraft Manufacturing North American Job Bank www.najobbank.comIf you submit an application or resume, which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word "remove" in the subject line to Register to View If you have further concern regarding email received from us, call Register to View . We will be glad to have a real human being contact you upon request.Please refer to job code 3083 when responding to this ad.

Job Title: Industrial / Sr. Manufacturing Engineer 2/3 - DRT Company: Boeing Location: Germantown, MD Description:   Responsibilities include: CONTRACT MANAGEMENT (CM): Interface with contract manufacturing partners for production analysis and corrective actions. Monitor and evaluate incoming production product performance and defects. Monitor and evaluate prototype assemblies for feedback to Contract Manufacturer and Digital Receiver Technology (DRT) design services. Experience evaluating contract manufacturers and assembly processes is desirable. DESIGN: Assist in the early development of DRT products from concept and design reviews through production feedback at all phases. Maintain Printed Circuit Board (PCB) design guidelines for DRT design services. Maintain PCB and Assembly drawing notes for DRT design services. Attend all part placement and design reviews. PCB: Monitor PCB fabricators regarding processing techniques, capabilities, and quality. Review for acceptance incoming PCBs and be able to analyze all deliverables. Experience evaluating PCB fabricators and fabrication processes is desirable. MANUFACTURING: Provide analysis for proper production load balancing and capacity planning. Interface the test environment processes with supporting departments. (i.e. QA, Test Engineering, Purchasing). Monitor, analyze, and report on DRT product assembly, at the card, module, and system level. Maintain control documents to track and manage existing product lines. Support Production floor and Engineering with all PCB or Printed Circuit Assembly (PCA) related issues or analysis. GENERAL: Perform special projects as assigned by the Manager of Manufacturing Engineering. Highly desired candidate would have Five (5) to Ten (10) years of experience in Process Engineering, Test Engineering or equivalent experience in manufacturing related fields with commensurate experience, working knowledge of PC assembly, the ability to research and work with various organizational/management levels within DRT, to identify and resolve process related issues and experience working with Excel, MS Word, Cam 350, GC preview or PCB Pads products. Other highly desired skills include: effective communication skills, both written and verbal, 5 years experience with PCB procurement processes and 5 years experience in PCB manufacturing and / or analysis.

Job Title: Production Manager - Manufacturing Engineer- Metal Fabrication Company: CyberCoders Location: Baltimore, MD Description: Production Manager - Manufacturing Engineer - CAD/CAM - FEAIf you are a Production Manager with a Degree and experience working with Metal Fabrication and/or heavy DOD steel welding and ISO certification, please read on!LOCAL CANDIDATES PREFERREDWhat you need for this position:- Degree in Mechanical, Industrial or Automotive Engineering. - 5-7 years experience in Production and/or manufacturing engineering- Lean Manufacturing experience- Excellent problem solving skills- Experience with Metal Fabrication- Experience with CAD/CAM and other IT skills.- FEA experience.- High energy and the ability to multi-task and wear many hats- Experience in heavy DOD Steel Welding a plusWhat you'll be doing:- Running the manufacturing floor- Assisting subcontractors in processes to ensure success.- Working with drawings and developing production plans- Designing and developing new products, modifying existing products and troubleshooting- Continually improving engineering testing, design and analysis- Reducing product cost through value engineering/value analysis- Supporting internal documentation systems in accordance with TS 16949- Interfacing with internal and external customers- Reviewing qualifications and determining suitability of vendors and their products- Supplying prototypes as requiredWhat's in it for you: Competitive SalaryGreat BenefitsExcellent Opportunities for GrowthSo, if you are a Production Manager with a Degree and experience working with Metal Fabrication and/or heavy DOD steel welding, we'd love to hear from you!Must be authorized to work in the United States on a full-time basis for any employer.

Job Title: Manufacturing - Engineer - Internship - Hunt Valley, MD Company: Procter & Gamble Location: Hunt Valley, MD Description: Each summer, PG manufacturing facilities hire engineering students as Summer Managers to work on challenging projects in the field of manufacturing management. As a Summer Intern, you are given the opportunity to make a meaningful contribution to the manufacturing site and to learn about manufacturing, technical management, and PG.Summer Intern projects are typically technical in nature, but also include a human element which requires strong leadership and communication skills. The projects address real business needs, giving you broad exposure to the organization while supporting your academic training.PG generally seeks to hire individuals that are in good standing at their university and/or field of study, this typically means people with overall GPA of 2.75 (on 4.0 scale) or above.At PG Intern/Coops sessions are considered temporary employment, with a predicted ending point. No full-time employment commitments are made; however, depending on satisfactory completion of certain criteria, candidates may be considered for full-time positions upon graduation.To learn more about this career path, click here.

Job Title: Production Manager - Manufacturing Engineer - Metal Fabrication - ISO - Subcontractors Company: CyberCoders Location: Baltimore, MD Description: Production Manager - Manufacturing Engineer - Metal Fabrication - ISO - Subcontractors .body .body h4 .body .section tr.oddRow a, a:link, a:visited Production Manager - Manufacturing Engineer - Metal Fabrication - ISO - Subcontractors near Baltimore, MD This job is open as of 3/10/2010. Apply Now! Not a fit for this job? Search other Production Manager jobs! Are you an employer? Visit us for more info! Email this job to a friend - $1000 Location Baltimore, MD; washington, DC Salary $70,000 - $90,000 Education Bachelor of Science Category Manufacturing Experience Required At least 2 Years Short Description Production Manager - Manufacturing Engineer - Metal Fabrication - ISO - Subcontractors Required Skills Production, Engineer, Manufacturing, ISO certification, subcontractors, metal Fabrication, CAD, CAM, FEA, Finite Element Analysis, Product management, engineering testing, analysis, design, value engineering, value analysis, TS 16949, prototypes, vendors, cost reduction Recruiter Sandy Messerli Date Updated 3/10/2010 Skills Required Production, Engineer, Manufacturing, ISO certification, subcontractors, metal Fabrication, CAD, CAM, FEA, Finite Element Analysis, Product management, engineering testing, analysis, design, value engineering, value analysis, TS 16949, prototypes, vendors, cost reduction Job Description Production Manager - Manufacturing Engineer - CAD/CAM - FEAIf you are a Production Manager with a Degree and experience working with Metal Fabrication and/or heavy DOD steel welding and ISO certification, please read on!LOCAL CANDIDATES PREFERREDWhat you need for this position:- Degree in Mechanical, Industrial or Automotive Engineering. - 5-7 years experience in Production and/or manufacturing engineering- Lean Manufacturing experience- Excellent problem solving skills- Experience with Metal Fabrication- Experience with CAD/CAM and other IT skills.- FEA experience.- High energy and the ability to multi-task and wear many hats- Experience in heavy DOD Steel Welding a plusWhat you'll be doing:- Running the manufacturing floor- Assisting subcontractors in processes to ensure success.- Working with drawings and developing production plans- Designing and developing new products, modifying existing products and troubleshooting- Continually improving engineering testing, design and analysis- Reducing product cost through value engineering/value analysis- Supporting internal documentation systems in accordance with TS 16949- Interfacing with internal and external customers- Reviewing qualifications and determining suitability of vendors and their products- Supplying prototypes as requiredWhat's in it for you: Competitive SalaryGreat BenefitsExcellent Opportunities for GrowthSo, if you are a Production Manager with a Degree and experience working with Metal Fabrication and/or heavy DOD steel welding, we'd love to hear from you!Must be authorized to work in the United States on a full-time basis for any employer. Are you a fit for this position? Please Click Here to Apply! (your information will be kept strictly confidential!) Not a fit for this position? Click Here to Search Other CyberCoders Jobs! Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, or you may also: Email your resume in Word to: Register to View **Please do NOT change the email subject line in any way. You must keep the JobID: CC HotJobAp : SM-PRDDESENG-MD -- in the email subject line for your application to be considered.*** Sandy Messerli - Senior Recruiter - CyberCoders Other Jobs CAD JobsCAM JobsEngineer JobsFEA JobsFinite Element Analysis JobsISO certification JobsManufacturing Jobsmetal Fabrication JobsProduction Jobssubcontractors Jobs

Job Title: Manufacturing Engineer Company: Northrop Grumman Corporation Location: Baltimore, MD Description: Process engineer is a fast-paced high-mix, low-volume electronics shop. Duties include preparing new manufacturing equipment for production readiness, developing process documentation and work instructions, assisting with design of custom tooling, developing & optimizing process parameters, assisting with the training of new personnel, recommending and implementing quality improvements, solving manufacturing problems and recommending product design improvements required to produce circuit card assemblies. This position may hire at a band level 2 or 3.. Basic Qualifications: Bachelor of science degree in an engineering discipline. 2-10 years manufacturing experience. Ability to obtain a secret security clearance. Proficiency in MS Office applications. Willingness to work in teams. Good communication skills. Must be a US Citizen and have the ability to obtain a security clearance. Preferred Qualifications: Knowledge of circuit card and/or electronics components technologies and materials. Familiarity with Lean, SPC and 6 Sigma concepts. This benchmark is intended to be used by companies that have generic classifications engaged in research and/or product development encompassing primarily one or more of the following engineering disciplines: electronics, electrical, mechanical, and/or chemical. Typical Minimum Education / Experience: 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD. MULTIPLE POSITIONS. Relocation Assistance Available. Security Clearance Required.