Manufacturing Engineer Jobs in Georgia

Job Title: Manufacturing Engineer Company: KASON INDUSTRIES Location: Newnan, GA Description: Manufacturing Engineer Kason Industries, a major commercial refrigeration and truck body hardware manufacturer, is seeking a Manufacturing Engineer with a proven track record in Class-A tool design preferably with ProE.This individual should have a minimum of 10 – 15 years experience in: Die casting, progressive dies, and automated tooling. Knowledgeable in troubleshooting the before mentioned processes. The ability to bring a project to a successful on time-on budget completion. An extensive background in tool and die designing/building is a must. This position requires a hands-on type person who is willing to work with all levels of personnel to solve manufacturing and tooling problems. Mechanical Engineering degree a plus. Kason Industries is an innovative company providing an excellent wage and benefits package that includes medical/dental insurance and 401(k). For consideration, send resume and salary history (consideration will not be given without salary history) to: Kason IndustriesAttn.: Human Resource Manager57 Amlajack Blvd.Newnan, GA 30265Fax: Register to View E-mail: Register to View

Job Title: Mfg. Engineer II Company: Gulfstream Location: Savannah, GA Description: Position Purpose:Under minimal supervision, independently prepare, conduct, and evaluate analyses for Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning). Principal Duties and Responsibilities Essential Functions:1) Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).2) Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.3) Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.4) Investigate and assist in preparing justification for equipment and facility requests.5) Perform productibility studies from engineering drawings.6) Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.7) Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.8) Incorporate Lean Manufacturing Methodology into existing and future processes.9) Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.10) With minimal supervision, lead/coordinate the implementation of projects between multiple organizations11) Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. Additional Functions:1) Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.2) Initiate and maintain accurate daily/weekly activity status based on work output, as required.3) Perform other duties as assigned.Other Requirements:1) Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 2) Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. Unique Skills Required:Previous manufacturing engineering and/or planning in aerospace preferred.Previous experience with Smarteam/Enovia/Catia V5 preferred. Experience/Education Required:- Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience. - Proven knowledge of Lean and/or Six Sigma principles.Three (3) years Manufacturing Engineering, planning, or related technical experience. - See Other Requirements in Job Description.

Job Title: Manufacturing engineer Company: Selectek Location: Roswell, GA Description: Manufacturing engineer We currently have an opening with a medical device manufacturer for a Manufacturing Engineer. This engineer will provide engineering and technical support for all manufacturing operations including set-up, installation, troubleshooting, and preventive maintenance on production and lab equipment. They will support engineering in the development of manufacturing processes and equipment for new and existing products. PRIMARY DUTIES AND RESPONSIBILITIES: -Provide engineering, technical, troubleshooting, and maintenance support for all existing and new manufacturing equipment and systems. -Perform preventive maintenance procedures on manufacturing equipment. -Support: (1) the assembly, fabrication, installation of mechanical, electrical, and software components (2) testing and validation of new equipment and manufacturing systems (3) procurement of components and production equipment. -Implement processes and mechanical improvements to production equipment and procedures. -Establish procedures and train employees on the operation of new and existing equipment. -Maintain a computer database to track equipment failures, problems, spare parts, maintenance logs to assist in increasing equipment up time and reliability. -Documentation of work done including engineering change reports, drawings, sketches, CAD files, procedures, project logs, etc. -Act as a liaison between other departments and work with vendors & equipment suppliers to procure equipment and supplies. -Participate in value engineering projects to increase production efficiency and capacity, reduce cost, improve quality, and improve equipment reliability and uptime. -Promote a safe work environment. MINIMUM QUALIFICATIONS: -4 year BS Degree in Engineering (mechanical, electrical, industrial, manufacturing) -5+ years experience EXPERIENCE: -Knowledgeable and experienced with manufacturing, automation, and process control equipment. -Solid technical background with strong troubleshooting, diagnostics, maintenance, and process improvement skills on automated manufacturing and process control equipment including: electrical, mechanical, electro-mechanical, control systems, programmable logic controllers, PLC, motion control, servo motors, stepper motors, robotics, software, pneumatic, hydraulic, sensors, actuators, fluid pumping systems. -Solid mechanical and machine design background. -Strong preventive maintenance knowledge and experience. -Experienced with installation, assembly, fabrication, and rebuild of manufacturing and process control equipment including: electrical, mechanical, pneumatic, hydraulic, and computerized components working from engineering documentation.

Job Title: Manufacturing Engineer - Machining Company: FPC of Huntsville Location: Savannah, GA Description: Work for a world class company as a Manufacturing Engineer. SUMMARY This position is responsible for the programming of on-line and off-line CNC equipment used in the repair, manufacturing and reverse engineering of combustion section parts in the power generation industry RESPONSIBILITIES · Program on-line and off-line CNC equipment such as 5 and 6 Axis High Speed Machining Centers, Lathes, HBM and VTL, CMM and ABB Robots · Proven CAD/CAM software programmer experience using Solid Works, Pro-E, SurfCam and other software types · Program NC 3, 4 and 5 axis equipment using Fanuc, Siemens and Allen Bradley controls · Program Robotic equipment using ABB Robot Teach, ABB Robot Studio or equivalent · CMM Programming using PC-DMIS · Support manual machining operations as required · Experienced with use of Laser Scanning · Develop equipment specifications · Support procurement and installation of new equipment · Design tooling and fixturing to support machining processes · Develop machining specifications and procedures and leading machine qualifications · Provide operator training and qualification · Support dispositions of nonconforming product. Lead corrective and preventive action initiatives as required · Provide supplier qualification and surveillance support · Continuously improve machining processes for both repair and new components · Competent in cost reduction activities and design of experiments · Lead technically the internal and external sources to complete assigned projects Perform other such duties as may be required. Education and/or Experience: Bachelor's degree (BA) in Engineering from four-year college or university and at least three (3) years related experience and/or training, or equivalent combination of education and experience. If you are interested and qualifed for this position please forward Rob Henshaw a copy of your resume as soon as possible. Rob will give you more details after he receives your resume. Rob Henshaw FPC Register to View Register to View

Job Title: Manufacturing Engineer II Company: IDEXX Laboratories, Inc. Location: Roswell, GA Description: Company: IDEXX Laboratories, Inc. Job Title: Manufacturing Engineer II Jobid: idexxlabs-*FC0AC4266B3D35B9 Job Location: Roswell, GA, 30077, USA Description: Manufacturing Engineer IIfunction SendResume() Job Title: Manufacturing Engineer II City: Roswell State: GA Country: United States Job Summary: TheManufacturing Engineer IIwill support the engineering effort to develop manufacturing processes for new and existing products. Aggressively look to implement applications or modifications to existing technologies and products to meet or exceed manufacturing and revenue cost goals. PRIMARY DUTIES AND RESPONSIBILITIES: * Participate in value engineering projects. * Implement processes and mechanical improvements to production equipment and procedures. * Liaison between other departments to offer input and direction to insure that the design, development and introduction of new products and equipment meet the manufacturing process requirements. * Support the assembly and installation of mechanical and electrical components, the testing and validation of new stations and manufacturing systems, and the ordering of components and production equipment. * Establish procedures and train employees on the operation of new equipment. * Review product designs for new and existing systems to ensure that all DFA and DFM issues are considered. * Set up and maintain a computerized system that both prompts production line and service troubleshooting and creates a database of found problems to assist in analyzing root cause of failure. Qualifications: MINIMUM QUALIFICATIONS: EDUCATION:B.S. degree in Mechanical, Manufacturing, or Industrial Engineering or 7 years of equivalent experience. EXPERIENCE: * Have working knowledge of electromechanical machines and ability to troubleshoot and recommend solutions. * CAD experience is preferable (at least 2D, ideally 3D). * Knowledge of Pneumatic and hydraulic devices and controls, Various mechanisms Optical and other sensors, Stepper motors, and Fluid pumping systems REQUIRED SKILLS AND ABILITIES: * Ability to read, analyze and interpret general business periodicals, professional journals, or technical procedures. * Ability to write reports, collect and present data. * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited information is available. * Ability to gather data to organize and present in a form that aids root cause analysis. * Ability to interpret a variety of instructions provided in written, oral, diagram, or schedule form. * Ability to perform well both independently and in teams. * Ability to draw sketches with dimensions for the purpose of being developed into drawings of layouts and tooling to enhance production. * Ability to organize and manage multiple priorities. * Display quality orientation and attention to detail. * Display excellent interpersonal and communication skills. * Ability to read blueprints and electrical and fluidic schematics. WORK ENVIRONMENT: * Employee shall conform to all current safety regulations and company policies. * While performing duties in developmental areas on products that are not completed, employee must have excellent judgment to assess particular risks with the product under development, and exercise the appropriate level of precautions for both the employee and others that may enter the area. * Often works in a manual assembly area. * The noise level in the work environment is usually low to moderate. No unsolicited Employment Agency resumes are accepted. Post Date: 12/30/2009 Job Code: 09-1269 Apply Now

Job Title: Environmental Health Safety Engineer - Manufacturing/Risk/Compliance 90-100 K/yr Company: THINK ENERGY GROUP Location: Savannah, GA Description: The second largest food refiner in the industry is currently seeking a Environmental Engineer for it's Savannah, GA location. Excellent direct hire position with full benefits and relocation for qualified candidates.ResponsibilitiesThe Environmental Engineer is responsible for directing all aspects of the Plant's environmental programPlanning for and achieving compliance with federal, state, and local regulationsOn-site risk reduction efforts involving natural resource conservation, pollution prevention and generally reducing the impact of ISC’s environmental footprintSupport and participate in other risk reduction exercises (e.g., Process Hazard Analysis [PHA], Job Safety Analysis [JSA], Risk Assessments, Start-Up Safety Audits, and Management of Change [MoC], and other internal inspections and audits) Achieve ISO 14001 certificationRequirementsBachelor’s degree in Environmental Engineering, Environmental Science, or related fieldProfessional certification/registration preferred (e.g., Certified Environmental Professional, Registered Professional Engineer, Certified Professional Environmental Auditor)Advanced knowledge of environmental science and environmental regulations5 - 7 years experience in environmental management2 – 5 years directing environmental compliance program at a chemical plantThorough understanding of relevant regulations and standards (e.g., CAA, CWA, SARA, RCRA, NPDES)Thorough knowledge of environmental release reporting requirements, natural resource conservation methodology, and pollution prevention methodologyChemical industry experienceBenefitsCompetitive salary based on experienceMedical/Dental/Prescription/Vision Life and Accidental Death and Dismemberment (AD&D) Insurance Long-Term Disability10 paid holidays, Sick Leave/Paid Vacation and paid leave of absence for funeral (family member) or jury dutyFlexible Spending Accounts (FSA) 401(k) Plan Tuition Reimbursement program (part or all of your tuition, books and some fees, subject to policy provision and authorization)Questions you will be asked: • Describe your past experience as a Environmental Engineering .• Describe your experience with planning and achieving compliance with federal, state and local regulations.• Describe your Experience working with technicians and consultants who take environmental samples • Please list you education and any certifications.• Do you currently live in Savanna GA area? If not, are you willing to relocate?This Job is located in Savannah, GA -> United StatesSee over 1,000 Power Plant / Energy Jobs on ThinkEnergyGroup.com. Related Words: bsenve-, enviromental assessments, phase i assessments, phase ii assessments, reconnaissance, site assessments, water quality, groundwater, remediation, soil sampling, landfill design, geotechnical reports, geotechnical assessment, groundwater remediation, watershed analysis, wetland restoration, air pollution, acid deposit, air quality, emissions, ems (environmental management system), pollution monitoring, emission inventory, ozone, pollution, toxic, particulate, thermal pollution, air sampling, clean air, caa, rcra, cwa, sara, npdes, pha, jsa, moc, iso, isc, ehsq, bsenve

Job Title: Mfg. Engineer III Company: Gulfstream Location: Savannah, GA Description: Position Purpose:Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning). Principal Duties and Responsibilities Essential Functions:1) Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).2) Generates make-or-buy proposals and recommends corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.3) Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.4) Investigate and assist in preparing justification for equipment and facility requests.5) Perform productibility studies from engineering drawings.6) Utilize CADAM/CATIA data and nesting software to generate flat patterns, NC data, and ply nests to meet Engineering and Manufacturing requirements.7) Apply statistical methods to estimate future Manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.8) Prioritize workloads based on schedules and needs; provides completion dates and work estimates based on available resources, past performance schedules, etc.9) Keep current on state-of-the-art manufacturing developments.10) Incorporate Lean Manufacturing Methodology into existing and future processes11) Complete knowledge and understanding of lean processes.12) Develop business case and present to management for process improvement approval.13) Assume the duties of the ME Group Head in his/her absence; advise and assist subordinates.14) Assign and review work of subordinate personnel.15) Supervise and train subordinates in work methods and procedures and in the efficient and effective use of company resources to resolve work-related or quality problems.16) Independently lead/coordinate the implementation of projects between multiple organizations.17) Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. Additional Functions:1) Ensure quality policies are being practiced; make recommendations and implement procedures to improve quality.2) Initiate and maintain accurate daily/weekly activity status based on work output, as required.3) Perform other duties as assigned.Other Requirements:1) Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.2) Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.3) Complete understanding and proven experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc.4) Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable.5) Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.6) Must have proven outstanding expertise in the specific discipline and proven track record in support of policies and rules and in consistently meeting objectives.7) Must possess initiative, planning ability, excellent interpersonal skills, and leadership abilities. Unique Skills Required:TBD Experience/Education Required:- Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience. - Proven knowledge of Lean and/or Six Sigma principles.Six (6) years Manufacturing Engineering, planning, or related technical experience. - See Other Requirements in Job Description.

Job Title: Manufacturing Engineer Company: Kelly Automotive Services Grp Location: Dublin, GA Description: Manufacturing Engineer Kelly Services currently has an exciting opportunity for a Manufacturing Engineer in Dublin, Georgia! Job Responsibilities: - Print, categorize, prioritize and analyze ECOs received from Engineering Central- Create and proofread the resulting Manufacturing Change Orders (MCOs) in JD Edwards- Print required drawings to accompany the ECO/MCO, from eViewer- Determine and enter appropriate Item Master data into JD Edwards, including primary stocking locations- Enter Production Part Request or Request For Change accordingly in Worldwide Purchasing System (WPS)- Record MCO data as instructed in appropriate data base, e.g. Access, Excel, etc.- File implemented ECO/MCO documentation- Enter planner data into Item Master in JD Edwards upon sourcing notification- Enter Spot Buys into WPS upon request- Resolve bill of material discrepancies that arise on a daily basis, in a timely manner, to avoid inventory errors- Working with Materials Department & relevant Product Engineer, perform periodic BOM audits across all product lines to insure component and quantity accuracy.- Enter Product Integrity Reports relating to design and assembly issues found during new product development builds.- Support Change Review Board meetings as required.- Support new product launch processes- Maintain pro-planner work bench- Run BOM, order, where used, reports periodically- Support WCM Work Organization pillar - Assist and support the change management process, following prescribed ISO documented procedures- Requires excellent organizational and time management skills?For immediate consideration, click the "Apply Now!" button, or refer a friend by clicking the "E-mail this job" link provided.Kelly Services specializes in the placement of professionals in contract, contract-to-hire, and direct placement employment opportunities across all industries. We are part of Kelly Services, a U.S.-based Fortune 500 company. With our global network of branch locations, we are uniquely positioned to provide our customers with international staffing support and our employees with diverse assignments around the world. Kelly Services is an Equal Opportunity Employer.

Job Title: Manufacturing Engineer II Company: NCR Corporation Location: Columbus, GA Description: Manufacturing Engineer (II)Location: Columbus, GAGrade: 9About NCR CorporationNCR Corporation (NYSE: NCR ) is a global technology company and leader in automated teller machines, self-checkouts and other self- and assisted-service solutions, serving customers in more than 100 countries. NCR s software, hardware, consulting and support services help organizations in retail, financial, travel, healthcare and other industries interact with consumers across multiple channels.Position SummaryResponsible for supporting the manufacturing line to ensure maximum quality of product, efficiency of production, and to maximize production output quantity and quality to meet goals and objectives of the company. Execute process improvements in production manufacturing areas. Ensure the efficiency of the processes and the outputs meet customer requirements.Key Areas of ResponsibilitySupport daily production line - both day and night shift - to ensure lean line continues going and production unit can be completed on time to meet FDDExecute and maintain manufacturing engineering process, equipment and testing systemResponsible for creating assembly process for new products, features, and kitsUnderstand the lean manufacturing and support layout planning for productionUnderstand the VMI principle to support and improve materials logistics process

Job Title: Manufacturing Engineer Company: Eastman Kodak Company Location: Columbus, GA Description: Eastman Kodak Company - Columbus, GA The Manufacturing Engineer provides electrical engineering and controls expertise to support a quality and safety driven organization with a high demand product. The primary role of the position focuses on implementing lean and six sigma principles into continuous improvement of safety, quality, productivity, and reliability metrics. The secondary role provides technical support and guidance for maintenance personnel, and coordination of outside services for preventive maintenance of switchgear and substation equipment, transformers, and rectifiers. This position requires self discipline, great organizational and communication skills, fluency in MS Office, and proficiency in project management to be successful.