Manufacturing Engineer Jobs in Arizona

Job Title: Manufacturing Engineer Manager Company: B/E Aerospace Location: Tucson, AZ Description:   Plans, directs, and coordinates manufacturing processes in industrial plant by performing the following duties. Essential duties and responsibilities include the following. Other duties may be assigned.   Essential duties and responsibilities include it engaged in product development, design, process definition/improvement or related technical support functions. Identifies and allocates manpower and resources to assure completion of established objectives within budgetary and schedule guidelines while upholding high technical standards. Supervises activities of an assigned unit in order to provide adequate technical support for new product or process developments, production and product problems, or to identify possible new areas for technical exploration. Assists management in identifying and initiating technical projects and programs which lead to improved processes and products, reduced costs or increased output. Establishes budgets for conducting section activities and accompanying technical projects; forecasts manpower, equipment and supply needs; and is responsible for managing section activities within established budgetary guidelines.     Job Requirements : Bachelor's degree (B.A.) from four-year college or university; and minimum 5 years related experience and/or training.

Job Title: Manufacturing Engineer Company: Superior Group of Companies Location: Tempe, AZ Description: Job Id: 213958Category: EngineeringDescription: Manufacturing Engineer on a large development program transitioning into high volume production. The candidate will serve as a focal point to the design team through New Product Introduction (NPI) and into full rate production of software definable to the US government. They will assume a leadership role during the NPI phase, and then continue to support the project during the production phase. The candidate must work as an individual technical contributor as well as leading small task groups. Candidate must also plan and execute project tasks, develop manufacturing plans and strategies for specific products and processes, take initiative in proposing ideas/soliciting input/optimizing solutions, and actively interface with Electrical, Software, System, and Test Engineers on related technical problems. It is strongly desired that the candidate be able to provide direction when required, research and analyze data to determine feasibility of design or process for production. Talent and Resources, Aligned. www.superiorjobs.com. EOE M/F/D/V

Job Title: Manufacturing Engineer 1/2 Company: Boeing Location: Mesa, AZ Description:   Supports and/or assists the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) to support the integration of technical solutions across multiple disciplines. Supports the development, identification and implementation of conceptual designs and maintenance of the program architecture for build. Participates in the implementation of manufacturing plans. Investigates and/or resolves technical problems. Assists in the implementation of Lean principles, theories and advanced technologies. Interfaces with IPTs and internal customers to develop products, skills, knowledge and experience.

Job Title: Sr. Manufacturing Engineer Company: Cxdesign (Correct By Design) Location: Scottsdale, AZ Description: 12 month contract job Leads the manufacturing effort on a small program or sub system of a major program. Report production activities and product status. Lead small team in the daily activities of meeting scheduled milestones within established parameters. Work closely with QA, Production Control and engineering staff to resolve issues and identify methods of processing hardware in a lean manner. Lead initiative to identify waste, cost drivers and schedule impacts. Provide technical input to design and processing of hardware. Extend oversight to manufacturing team while product is being planned and built. Knowledge of work instruction generation, MIL-STD / NASA workmanship application and root cause / corrective action development. Qualificaitons: Bachelors with min 2 years or 5 years equivalent experience in related manufacturing environment. Knowledge of PWB processing that is applicable to NASA and J-STD soldering and assembly.

Job Title: Manufacturing Engineer Intern Job Company: ATK Location: Mesa, AZ Description: Manufacturing Engineer Intern Job Job Posting Title: Manufacturing Engineer InternRequisition ID: 7519Full or Part Time: Full-timeCity: MesaState: AZBusinessUnit ASG Integrated Weapon SystemsRequirementsCompany Profile:Join ATK and you will find a home in a premier aerospace and defense company. We are committed to developing the technologies of tomorrow and providing our employees with rewarding careers. With operations in 22 states, Puerto Rico, and internationally, ATK offers the challenge of making a difference. Consider the following exciting opportunity and discover how YOU can make a difference at ATK.ATK Innovation Delivered XM25A TIME magazine Top Invention of 2009: Click HereATK Integrated Weapon Systems (IWS) is a leading producer of medium-caliber gun systems for ground, sea, air platforms, a complete family of medium-caliber training and tactical ammunition that meets today's requirements and serves as the cornerstone for tomorrow's Future Combat Systems. ATK also develops Fire Control Electronics, Sensor Packages, and Servo Controls. This includes both hardware and software for these embedded system components.Experience IWS Culture: Click HereSummaryDocument Process Flow for New Product DevelopmentResponsibilitiesMap process flow for new gun builds, remanufacturing and barrel machining.Identify inputs and outputs for each process step.Special emphasis placed on inspection points, required specifications and needed documentation. Create a document showing the current process and identify improvement opportunities to eliminate waste.EducationCompleted minimum two years of college towards a BS in Engineering prefer Industrial or Manufacturing students with interest/knowledge in lean manufacturing or quality systems, 3.0 grade point average or better preferred.QualificationsMust have completed undergraduate courses in Engineering.Skills and proficiency with Microsoft Office suite- Excel, Power Point and CAD system.Highly motivated, self-directed with initiative and flexibility.Excellent communication skills.ATK is on the move. We have the people, strategy, agility, and products to thrive in a highly dynamic national security and space environment. If you are a dynamic, successful, driven student, ATK is the company that will further your experience and career growth. As an Equal Opportunity Employer, we are committed to a diverse workforce.ATK is an Equal Opportunity Employer M/F/V/D and uses E-Verify employment eligibility system.

Job Title: Manufacturing Engineer II Company: General Dynamics C4 Systems Location: Scottsdale, AZ Description:  Job Title    Manufacturing Engineer II  Location    Scottsdale AZ  Job Description   Strong technical contribution as individual designer. Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards. Implements and analyzes manufacturing engineering plans and projects. Designs, develops and transfers manufacturing engineering tools, strategies and systems. Develops manufacturing engineering plans and strategies for specific products and processes. Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Plans sub tasks. Follows direction and makes a significant contribution to the team. Listens to and acts on mentor advice. Promotes process/policy compliance. Supports continuous improvement initiatives. BS Degree in a technical field related to manufacturing engineering or equivalent experience is required, as well as demonstrated mastery of practical engineering application that is typically acquired in two or more years of directly related experience.  Req. Number    S10-11886   General Dynamics C4 Systems is an Equal Opportunity/Affirmative Action Employer. We welcome and encourage diversity in our workforce.

Job Title: Manufacturing Engineer II Company: General Dynamics C4 Systems Location: Phoenix, AZ Description: BS Degree in a technical field related to manufacturing + 3 years of demonstrated results, or equivalent experience.Strong technical contribution as individual designer. Identifies domain of expertise.Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards.Implements and analyzes manufacturing engineering plans and projects. Designs, develops and transfers manufacturing engineering tools,strategies and systems. Develops manufacturing engineering plans and strategies for specific products and processes.Plans sub tasks. Follows direction and makes a significant contribution to the team. Listens to and acts on mentor advice. Begins to understand other commitments and interdependencies. Moves from sub-task optimization to project optimization. Promotes process/policy compliance. Supports continuous improvement initiatives.Expanded contact within internal work groups. Usually participates with other members of the team. Mentee relationship(s) established. Occasional outside business contact.Keeps abreast of technology trends. Identifies technical interests & aligns training plans with interestsTakes initiative in proposing ideas, soliciting input, and optimizing solutions.Business Impact: Awareness of business objectives and role in achieving. Awareness of business objectives and role in achieving.Demonstrates Leadership as follows:Ideas that enhance productivity & efficiency. Willingly considers new ideas & perspectives Takes reasonable risks within the bounds defined. Identifies alternatives in the midst of barriers to progress.Ability to obtain a DOD clearance is required.

Job Title: Medical Device - R&D Program Mgr; Sr. R&D Eng; Sr. Quality Eng; Sr. Mfg Eng Company: Cambridge Executive Recruiters Location: Phoenix, AZ Description:   Normal 0 false false false MicrosoftInternetExplorer4 classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui> st1\:*  /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal p p.msonormaloverwrite, li.msonormaloverwrite, div.msonormaloverwrite Register to View Section1 div.Section1 -->  /* Style Definitions */ table.MsoNormalTable Cambridge Executive Recruiters -  Medical device recruiting forR&D, Quality, and Manufacturing engineers and managers.  Our clients vary in size fromdevelopment-stage, to very large and focus on minimally invasivecardio/peripheral vascular & interventional medical devices. The listedpositions below are in the Phoenix, Arizona area.  This larger,established medical device client offers a Competitive Salary plus bonus,including relocation assistance for the ideal candidate coming from out of thearea.  About us: www.cambridgerecruiters.com (client list & placement history) R&DProgram Manager –  120-130K base + bonusLooking for hands-on leader tomanage team of Product Development/R&D Engineers for minimally-invasive interventional& implantable medical device projects.  The company currently has afamily products in development & on the market, and this project is todevelop a next-generation application for their flagship technology.Requirements:  Hands-onMechanical/Manufacturing Engineering background with interventional orimplantable devices.  Must have designed-developed & commercializeddevices from start to finish, as well as a strong aptitude & expertise withPolymer materials & catheter/implantable manufacturing process.Degreed Engineer (BSME/MSME) with at least8-12+ yrs relevant experience, and 2-4+ yrs proven people & projectmanagement or program manager level.   Will consider high-level technical-trackPrincipal Engineer with project mgmt experience.Sr. R&DEngineer – Catheters & Class III implantables (3 positions available) –$90-110K base + bonus - BS Mechanical Engineering, Metallurgical Engineering or related discipline,plus at least eight years of directly related experience; MS degree preferred. Must have experience in the design,development and commercialization of Catheters & delivery systems -experience with balloon catheters & stent design highly desirable. -  Applymechanical engineering knowledge to the design and development of new productsas well as product changes and enhancements which are consistent with a zerodefect level as well as low product cost.  -  Solvemechanical engineering problems at the component through system level.  -  Conducttesting utilizing existing test protocols or develop new ones as needed.  -  Completeprojects (including product enhancements) in a manner consistent with corporateobjectives.  -  Contributeto the intellectual property position of the company via invention and patentapplications.  -  Maintainaccurate documentation of concepts, designs, drawings, and processes.  -  Maintaincurrent knowledge of competitive technologies in addition to medical,technical, and biomedical developments related to company products.  -  Providemechanical engineering and technical support of products introduced into boththe domestic and international markets as well as physician in-serviceprograms.  -  Providemechanical engineering support in the resolution of product complaints and/orsafety issues.  -  Work withother engineering, manufacturing, clinical affairs, sales and marketing, andquality assurance staff to coordinate pilot production of newproducts.   Senior Manufacturing Process Engineer – Salary flexible DOE85-100K base + bonus Position will develop manufacturing processes, tooling, andfixtures for a catheter-based implant & delivery system(Endovascular).  - Education:  BSME/MSME; MatSci or Biomedical Eng.degree- 7-10+ yrs - Must have experience with Catheters/Stents or otherminimally-invasive implantable devices-Strong Manufacturing Process/equipment validations experience.-Requires experience with IQ/OQ/PQ's & DOE's.-Tooling & fixture design experience a plus.-Machine shop experience a plus.-AutoCad and/or SolidWorks experience a must!  SeniorQuality Engineer - $95-115K base + bonus (2 positions available)Responsibilities include performing process validations, dataanalysis, and verification of test results to draw statistical conclusions fromthe validation study, developing quality assurance specifications, testmethods, sampling plans and related written procedures. -BS Degree, MS preferred (Engineering- BSME, Materials Science,Biomedical).-5+ years MEDICAL DEVICE, Quality Engineering experience(R&D or Mfg support)-Must have experience with DOE's, Statistical Process Control.-Experience with OQ/IQ/PQ + equipment validations.-ASQ Certified Quality Engineer a plus.

Job Title: Surface Mount Manufacturing Engineer II Company: Superior Group of Companies Location: Scottsdale, AZ Description: Job Id: 214508 Category: Engineering Description: Duration: 6 months not to exceed 24 months.Pay Rate: $30.00 - $38.00/hourThe selected engineer for this position will be a technical contributor in the Surface Mount Technology Manufacturing Cell in C4S. The individual will be expected to develop, evaluate, improve SMT manufacturing methods, utilize knowledge of product design, materials and parts in the fabrication of SMT circuit card assemblies. Regular job duties include, but not limited to, designing of solder stencils, custom tooling for CCA’s, solder paste selection, improving processes within a particular trade space using DOE techniques, developing work instructions, planning either engineering or production CCA runs, and over seeing builds. Individual will be working in a team environment and must be willing to trade off alternative approaches to solving complex manufacturing problems. Talent and Resources, Aligned. www.superiorjobs.com. EOE M/F/D/V

Job Title: Manufacturing Engineer Co-Op Company: Parker Hannifin Location: Glendale, AZ Description: Manufacturing Engineer Co-Op position for the Summer/Fall term.  This position assists Overhaul / Repair Engineering in a leading aerospace company that develops and manufactures fuel injection nozzles for gas turbine engines.  Individual tasks include, but are not limited to; assisting Overhaul / Repair Engineering Personnel, repair scheme development, tool design and documentation, process troubleshooting, and creation of process work instructions. A mix of analytical and hands-on assignments is likely.  The student will have the opportunity to gain knowledge about aerospace Repair / Overhaul methods and practices through practical experiences.    A comprehensive training plan is used to challenge and encourage the student to achieve a thorough understanding of the aerospace Repair / Overhaul disciplines.  Completion of the training program provides the student with all the skill sets needed to function as a Repair / Overhaul engineer in our organization.     Co-op students are expected to develop the skill sets defined in the training plan in order to satisfactorily complete the work block.     Representative tasks: 1.  Make tool drawings of existing undocumented tooling. 2.  Document tooling equivalency. 3.  Assist Engineering in investigations. 4.  Assist Engineering in process reviews. 5.  Rapid set up and change over project. 6.  Update process drawings from mark ups. 7.  Process PECO's. 8.  Text manufacturing drawings (work instructions) 9.  Input documents into PDM system. 10.  Gage R&R studies.