Engineer Jobs in Washington

Job Title: Electronic Design and Analysis Engineer 4/5 Company: Boeing Location: Tukwila, WA Description:   Senior Design Engineer responsible for design and test of microwave (MMIC) and RF (RFIC) integrated circuits reporting to BR&T Solid-State Electronics Development org. Duties include design, simulation, test, and analysis of microwave and RF integrated circuit designs. Projects include design and microelectronics technology development programs both for internal Boeing and external Government customers. Candidate should be able to perform definition, design, development, test and verification using Si, GaAs, SiGe, InP technologies. Circuits may include design of components covering frequencies from 5 GHz to 200 GHz including low noise amplifiers, mixers, power amplifiers, switches, phase shifters and attenuators, for applications such as Radar and communications phased array antennas. Experienced with microwave and RF CAD tools such as Agilent ADS, Cadence RF, Microwave Office, Sonnet EM or equivalent is required. Must have demonstrated experience in the use of ElectroMagnetic simulation for RF design, including MMICs. Basic understanding of communication systems principals is also necessary. Experience in mixed signal integrated circuits including design and verification is a plus. Ability to develop high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to assess progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Works under general direction and must have good verbal and written communications skills, and interpersonal skills to work with customers, teammates and suppliers. Candidates must have at minimum of an MSEE and 5 years of high frequency (> 5 GHz) IC design experience or equivalent.

Job Title: Sr Quality Engineer Company: Philips Location: Bothell, WA Description: We simplify healthcare by focusing on the people in the care cycle – patients and care providers. Through combining human insights and clinical expertise, we aim to improve patient outcomes while lowering the burden on the healthcare system. Philips delivers advanced solutions for both health professionals, to meet the needs of patients, and empowered consumers for affordable healthcare whether in hospital or at home. Some product highlights: 256-slice Brilliance iCT scanner, Integrated cath lab, Avalon FM 20 & FM 30 fetal monitors, Ambient Experience MR and CT systems, Philips Lifeline's personal emergency alert service.Quality EngineeringJob DescriptionPRIMARY OBJECTIVE: The following is considered with the major focus being on product and process quality assurance. As one of several Quality Engineers in the Quality Assurance department, works with other Quality Engineers to provide consulting support in the role of QE project lead for sustaining and new product manufacturing production and test equipment processes. As Quality Engineer lead, plans, conducts and oversees engineering assignments, estimating engineering personnel needs as they relate to CAPA investigations, NPD project support, manufacturing support, process FMEA and V&V support, and test equipment hardware and software qualifications for product development and manufacturing process projects. Schedules work to meet completion dates and technical specifications. Coordinates engineers and technicians assigned to projects and maintains liaison with various departments as necessary to achieve team support and milestone completions. Reviews progress, evaluating and reporting results. Makes and/or plans changes in methods, design or equipment where necessary. Generally operates with appreciable latitude for un-reviewed action or decision.MAJOR DUTIES AND RESPONSIBILITIES: 1. Provides support, leadership and guidance on the Quality System, specifically as it pertains to the Quality System Regulations and per defined procedures; 2. Acts in coordination and support for Corrective and Preventive actions as they pertain to assigned area(s), ensuring investigations through to root cause in concert with other departments (i.e. Engineering, Manufacturing, etc.); 3. Consults and provides guidance to other department personnel, Design, Process Control and Manufacturing Engineers, on the use of Quality Assurance tools, ensuring robust quality systems throughout the lifecycle of production test equipment; 4. Supports Quality System Compliance by performing internal audits of the Quality System as assigned.Requirements: 1. BS in Engineering or related technical discipline, MS preferred. 2. Minimum 8 years experience in manufacturing/development environments, with at least 5 years in medical device or other FDA regulated industries. 3. requires strong working knowledge of QSR/ISO requirements. 4. Requires strong working knowledge of quality assurance principles and practices, industry and international safety standards; 5. Must possess excellent communication (verbal & written) skills and analytical problem solving skills; 6. Working knowledge of various software packages including Microsoft (Excel, Word, Project, Access) and SAP applications is desirable.Philips is an equal opportunity employer.Job ID: 63685.

Job Title: Hardware Engineer Company: Collabera Location: Redmond, WA Description: REC DescJob Description: DfX Engineer - PCBA The New Product Introduction (NPI) team is looking for a highly motivated, team-oriented DfX engineer to assist in the development, deployment and maintenance of a world-class Design for X infrastructure within the E&D Manufacturing, Finance, Supply Chain and Information Solutions group. Scope of Responsibilities/Expectations DfX a critical component in the realization of the E2E concurrent engineering approach used for hardware product development within E&D. Design for manufacturability, assembly, test, sourcing and reliability are a few of the many facets of DfX that are considered and managed as part of the development process. The DfX engineer is part of the NPI technical team which manages the integration of DfX activities into the hardware product development schedule; assuring that each product developed sets new standards in terms of quality, reliability, manufacturability and COG sensitivity. As a member of the NPI team, the DfX engineer will be involved with any number of hardware products Zune and PC Hardware. The position requires a strong technical aptitude including an excellent understanding of DfX methodologies, high volume electronics manufacturing processes, printed circuit board technology, component selection, test and inspection methodologies, quality assurance and consumer electronics product development. This position reports to the NPI DfX Manager and requires interaction with a wide range of disciplines both within E&D as well as with manufacturing partners outside of Microsoft. The successful candidate will be able to draw from industry experience to provide technical guidance, perform physical and statistical analysis, recommend and prepare design-of- experiments, characterize process/design interactions, review component and product design specifications, analyze mechanical and electrical design information and draft/edit specifications and technical guidelines. Start/LOA: We need someone ASAP, and would like to onboard by mid April. This will be a 40 nr/week position for 6 month minimum with a high potential for extension to 1 year. Additional Skills: Job Requirements ? BS/MS in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, Material Science Engineering or Physics ? 8+ years of automated, high volume manufacturing engineering experience involving printed circuit board assembly (SMT and through-hole) and mechanical systems integration in the consumer electronics industry. Hands-on process experience is mandatory. ? Knowledge of typical PCBA and product level failure modes (production and field.) Ability to relate failure mode to process, material and design related stressors. ? Demonstrated experience working as a member of a product development engineering team, either as a hardware design engineer or as a manufacturing engineer where a systematic design for manufacturing, design for test, and design for service approach was used and/or adopted. ? Demonstrated experience in product/process characterization using techniques such as FEA, strain analysis, cost modeling, DOE, yield and defect data analysis. ? Demonstrated experience in root cause analysis of consumer electronics products using techniques such as FTA, Ishikawa, DFMEA, PFMEA and Cause Mapping. ? Printed Circuit Board layout or fabrication experience/knowledge, proficiency with PCB CAD layout and/or viewing software. ? Proficiency in statistical analysis techniques and data reporting using analysis software such as JMP or Minitab. ? Proficiency in the use of MS Office products; Word, Excel, Visio and PowerPoint with specific experience in technical presentation preparation, process flowcharting, technical specification authoring and spreadsheet manipulation. ? Experience working with or for Tier 1 contract manufacturers. ? Familiarity with industry standards (IPC, JEDEC, IEEE, EIA, etc.) ? Reliability and/or quality engineering experience is a plus. Pleace contact : Nirmal. Register to View

Job Title: Senior Regulatory Affairs Engineer Company: Cardiac Science Corporation Location: Bothell, WA Description: Senior Regulatory Affairs EngineerLocation: US-WA-BothellExperience (Years): 7Category: RegulatoryJob ID: 2021Pos. Type: Full Time * ClickHEREto apply for this position and begin the application process.* Refer a friend to this jobMore information about this job:Overview:Cardiac Science develops, manufactures, and markets a family of advanced diagnostic and therapeutic cardiology devices and systems, including automated external defibrillators (AEDs), electrocardiograph devices (ECGs), cardiac stress systems and treadmills, Holter monitoring systems, hospital defibrillators, cardiac rehabilitation telemetry systems, and cardiology data management systems (informatics) that connect with hospital information (HIS), electronic medical record (EMR), and other information systems. Cardiac Science is the successor to the cardiac businesses that established the trusted Burdick®, HeartCentrix®, Powerheart®, and Quinton®brands.As a Sr. Regulatory Affairs Engineer reporting to the Sr. Manager, Regulatory Affairs, your primary responsibility will be to assist in the timely completion of all worldwide regulatory activities relating to product approval and compliance. Ensure proper implementation and use of established QA/RA policies and processes. Ensure proper implementation and use of the QS databases and QM processes. Prepare 510(k) Submissions and Letters to File. Ensure compliance of the company's facilities quality systems to the requirements of FDA's Quality System Regulation, ISO-9001, EN-46001 and ISO-13485. Will be responsible for compliance of all existing and new products to domestic and international regulations such as EU MDD, UL, CSA, IEC, JIS, WEEE and ROHs as well as assuring compliance to regulations, which are specific to companies product mix.Responsibilities:* Coordinates all submission activities with respect to planning, scheduling, coordinating and submitting regulatory documents (e.g., 510(k)'s PMA's, Agency Licenses) based upon a thorough knowledge of FDA regulations, guidance's and international licensing requirements.* Will assist in the development and promotion of Cardiac Science Corporation's quality system and philosophy, as well as defining, maintaining and updating of departmental (incoming, in-process and testing) standards, methods and procedures.* Will assist in maintaining sites ISO 9001/EN-46001/IS0-13485 registration activities (i.e. CAR process, risk management, and external communication and coordination with outside regulatory agencies etc.) as well as compliance with requirements of WEEE and ROH's.* Provides regulatory advice and guidance to the operational product teams (i.e., US and Global colleagues) with respect to regulatory programs to ensure they meet FDA requirements and guidance's as well as international regulatory requirements/strategy.* Assists Departmental Management with Labeling, Clinical Affairs and Legal issues to ensure all activities are consistent with other functional contributions and with past FDA interactions.* Prepare and submit adverse events as appropriate to affected regulatory bodies.* Review complaints and service reports for adverse event reporting requirements.* Prepare regulatory filings as appropriate (establishment registration, recalls, medical device listing etc.)* Develop ROI Analysis on quality/regulatory projects to determine cost effective methods for obtaining/performing product evaluations and approvals.* Represents the group in various inter-departmental meetings and project teams.* Coordinate quality & regulatory activities with Manufacturing and Design Engineering groups.* Performs risk management activities per ISO-14971 and participates in developing product risk analyses.* Apply scientific principles to understanding safety and efficacy on a wide range of products.* Assures pro-active relationship in the Design Triads with Engineering, Manufacturing, Marketing, Quality, and Service to ensure that all products are and remain in compliance.* Performs internal regulatory audits to verify compliance of products with applicable safety standards and construction reports.Qualifications:* Technical degree or equivalent experience* Seven to Twelve years experience in the medical devices, biotech, and/or highly regulated electronics manufacturing environment* Working knowledge of FDA's Quality System Regulation, ISO-13485, EN-46001, and ISO-9001* Possess the ability to interpret and apply various FDA regulations and international regulations* Interact effectively with a variety of departments and levels within the company* Excellent communication and presentation skills* Ability to multi-task, problem solve and adapt quickly in a rapidly evolving teamwork environment* Strong leadership skills and excellent communication skills required* Comprehensive knowledge of PC skills to include MS Project, MS Excel, MS PowerPoint, and MS Word* Ability to work overtime and travel as necessaryEqual Opportunity Employer – M/F/V/D

Job Title: QUALITY ENGINEER (FDA/ISO 13485) Company: Adecco Location: Seattle, WA Description: Our client in Seattle/Bothell, Wa is looking for a Quality Engineer with 3-8 years of experience in Quality Engineering or related discipline. Must have at least 1 year of FDA experience and ISO 13485. Project coordination/management experience is a plus. This position will begin in Seattle and move to Bothell after 1-2 months. Total Duration: 3+ months. Rate: Open BS in Engineering or related technical discipline. 2. Minimum 3 years experience in manufacturing/development environments, with at least 1 year in medical device or other FDA regulated industries (preferred). 3. requires strong working knowledge of QSR/ISO requirements. 4. Requires strong working knowledge of quality assurance principles and practices, industry and international safety standards (ISO 13485); This can be as Quality Engineer or in Project Management dealing with Quality issues; or other area dealing with Quality issues. 5. Must possess excellent communication (verbal & written) skills and analytical problem solving skills; 6. Working knowledge of various software packages including Microsoft (Excel, Word, Project, Access) and SAP applications is desirable. PRIMARY OBJECTIVE: The following is considered with the major focus being on product and process quality assurance. As one of several Quality Engineers in the Quality Assurance department, works with other Quality Engineers to provide consulting support in the role of QE project lead for sustaining and new product manufacturing production and test equipment processes. As Quality Engineer lead, plans, conducts and oversees engineering assignments, estimating engineering personnel needs as they relate to CAPA investigations, NPD project support, manufacturing support, process FMEA and V&V support, and test equipment hardware and software qualifications for product development and manufacturing process projects. Schedules work to meet completion dates and technical specifications. Coordinates engineers and technicians assigned to projects and maintains liaison with various departments as necessary to achieve team support and milestone completions. Reviews progress, evaluating and reporting results. Makes and/or plans changes in methods, design or equipment where necessary. Generally operates with appreciable latitude for un-reviewed action or decision. MAJOR DUTIES AND RESPONSIBILITIES: 1. Provides support, leadership and guidance on the Quality System, specifically as it pertains to the Quality System Regulations and per defined procedures; 2. Acts in coordination and support for Corrective and Preventive actions as they pertain to assigned area(s), ensuring investigations through to root cause in concert with other departments (i.e. Engineering, Manufacturing, etc.); 3. Consults and provides guidance to other department personnel, Design, Process Control and Manufacturing Engineers, on the use of Quality Assurance tools, ensuring robust quality systems throughout the lifecycle of production test equipment; 4. Supports Quality System Compliance by performing internal audits of the Quality System as assigned. Please email resume to Register to View Please include “Quality Engineer” in the Subject Line.

Job Title: Principal R&D Engineer - Spokane, Washington Company: Honeywell Location: Spokane, WA Description: Honeywell Electronic Materials SBE (HEM) is a global business defining interconnect solutions provider with chemistry and metallurgy expertise second to none. HEM offers Spin-on dielectrics, metals for barriers and wiring, interconnect packaging solutions and global services. HEM is resourced and committed to serving our customers throughout the world. And with GLOBAL EXACT manufacturing locations across North America, Europe and Asia, our customers can be confident that the same high quality products and services will be available everywhere they are needed.We have an immediate opportunity for a Principal RD Engineer in Spokane, WA.JOB DESCRIPTION: Fundamental understanding of metallurgy, material science, mechanics, and heat transfer Fundamental understanding of electronic packaging including qualification testing (thermal and mechanical) Develop new alloys for Pb-free electrical interconnect applications Develop solder-paste versions of these alloys Develop new metal-based thermal interface materials for both TIM1 and TIM2 applications Utilize laboratory equipment (SEM, DSC, TGA, TMA, Flash diffusivity, CSAM) Work with members of the development team, the commercial group, customers and OEMs to identify, define and conduct development projects. Work with process engineering, equipment, quality and production departments to transfer developmental technology into production. Provide technical support as needed for existing products. Be able to use statistical problem solving methods, participate in brain storming exercises and conduct designed experiments as needed. Identify, design, conduct and evaluate experiments and experimental testing programs for various projects. This also includes the ability to conduct a measurement system analysis. Thoroughly characterize new products and processes so that they transfer seamlessly and cost effectively into production with high yields. Develop robust manufacturing processes in collaboration with other team members. Provide regular updates on project status through accepted communication modes. Examples include the New Product Development system (internal), e-mail, meetings presentations. Follow six sigma methodologies in day to day activities including statistical problem solving methods, designed experiments, measurement system analysis, product scorecard and any other black belt tools that apply to the problem at hand. Keep up to date on technology developments, trends, innovations and issues related to electronic materials, micro electronic packaging, and materials processing technologies. Recommend new manufacturing technologies and processes that complement or expand HEMs core competencies. Generate patents and write technical papers as appropriate. Preparation of electronic packaging materials for shipment to the customers and other locations within Honeywell. Properly follows documentation, order entry, labeling, packing and shipping procedure and processes; Follow standard operating procedures to insure consistent quality; Follow safety procedures, including the use of common sense to ensure safe handling of all raw materials, intermediate and finished products; Insure high quality processing and testing of formulation and materials with best possible accuracy and shortest possible turnaround times; The ability to get, analyze and present results timely; Must be self-motivated and proactive; The ability to work independently on assigned task with minimum supervision; The ability to work effectively with others and demonstrate a positive teamwork approach to all job functions; Must be adaptable and flexible to changing work environment and priorities.

Job Title: Hardware/DfX Engineer Company: COMSYS Location: Bellevue, WA Description: Hardware/DfX Engineer4 monthsManufacturing engineering, DfX, FEA, strain analysis, cost modeling, DOE, yield and defect data analysisJob DescriptionOur clients team is looking for a highly motivated, team-oriented DfX engineer to assist in the development, deployment and maintenance of a world-class Design for X infrastructure within the Manufacturing, Finance, Supply Chain and Information Solutions group.Scope of Responsibilities/ExpectationsDfX a critical component in the realization of the concurrent engineering approach used for hardware product development within our clients division.Design for manufacturability, assembly, test, sourcing and reliability are a few of the many facets of DfX that are considered and managed as part of the development process.The DfX engineer is part of our clients technical team which manages the integration of DfX activities into the hardware product development schedule; assuring that each product developed sets new standards in terms of quality, reliability, manufacturability and COG sensitivity.As a member of the team, the DfX engineer will be involved with any number of hardware products under development in product groups.The position requires a strong technical aptitude including an excellent understanding of DfX methodologies, high volume electronics manufacturing processes, printed circuit board technology, component selection, test and inspection methodologies, quality assurance and consumer electronics product development.This position reports to the DfX Manager and requires interaction with a wide range of disciplines both within our clients division as well as with manufacturing partners outside of our clients organization.The successful candidate will be able to draw from industry experience to provide technical guidance, perform physical and statistical analysis, recommend and prepare design-of-experiments, characterize process/design interactions, review component and product design specifications, analyze mechanical and electrical design information and draft/edit specifications and technical guidelines.Job Requirements BS/MS in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, Material Science Engineering or Physics 8+ years of automated, high volume manufacturing engineering experience involving printed circuit board assembly (SMT and through-hole) and mechanical systems integration in the consumer electronics industry.Hands-on process experience is mandatory. Knowledge of typical PCBA and product level failure modes (production and field.)Ability to relate failure mode to process, material and design related stressors. Demonstrated experience working as a member of a product development engineering team, either as a hardware design engineer or as a manufacturing engineer where a systematic design for manufacturing, design for test, and design for service approach was used and/or adopted. Demonstrated experience in product/process characterization using techniques such as FEA, strain analysis, cost modeling, DOE, yield and defect data analysis. Demonstrated experience in root cause analysis of consumer electronics products using techniques such as FTA, Ishikawa, DFMEA, PFMEA and Cause Mapping. Printed Circuit Board layout or fabrication experience/knowledge, proficiency with PCB CAD layout and/or viewing software. Proficiency in statistical analysis techniques and data reporting using analysis software such as JMP or Minitab. Proficiency in the use of Microsoft Office products; Word, Excel, Visio and PowerPoint with specific experience in technical presentation preparation, process flowcharting, technical specification authoring and spreadsheet manipulation. Experience working with or for Tier 1 contract manufacturers. Familiarity with industry standards (IPC, JEDEC, IEEE, EIA, etc.) Reliability and/or quality engineering experience is a plus.About our client:The Software Giant, headquartered in Redmond, Washington is looking for top talent local to the Puget Sound area! If you are interested in being part of the latest and greatest in technology and being part of cutting edge solutions, this is the place for you!If you have previous experience working for the Eastsides largest software company in the past, we want to talk with you! Please email your resume to Angela at Register to View referencing the appropriate Job ID 10503556. Phone calls are also welcome: Register to View .About COMSYS:COMSYS (NASDAQ: CITP) is a leading IT services company with 50 offices across the U.S. and offices in Puerto Rico, Canada and the U.K. COMSYS service offerings include contingent and direct hire placement of IT professionals as well as a wide range of technical services and solutions addressing requirements across the enterprise. TAPFIN Process Solutions delivers critical management solutions across the resource spectrum from contingent workers to outsourced services. For more information, visit www.comsys.com . At this time COMSYS cannot accept third party vendors or ICs. COMSYS is an equal opportunity employer.Referrals are welcome! Apply Now Location:Bellevue/Redmond, WA 98052Status:Full Time, Temporary/Contract/ProjectJob Category:EngineeringCareer Level:Experienced (Non-Manager) About COMSYS COMSYS (NASDAQ: CITP) is a leading IT services company with 52 offices across the U.S. and offices in Puerto Rico, Canada and the U.K. COMSYS service offerings include contingent and direct hire placement of IT professionals as well as a wide range of technical services and solutions addressing requirements across the enterprise.COMSYS is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, disability, military status, national origin or any other characteristic protected under federal, state, or applicable local law. View all COMSYS opportunities Learn more about COMSYS at www.comsys.com Send this job to a friend

Job Title: Quality Engineer Company: Philips Location: Bothell, WA Description: We simplify healthcare by focusing on the people in the care cycle – patients and care providers. Through combining human insights and clinical expertise, we aim to improve patient outcomes while lowering the burden on the healthcare system. Philips delivers advanced solutions for both health professionals, to meet the needs of patients, and empowered consumers for affordable healthcare whether in hospital or at home. Some product highlights: 256-slice Brilliance iCT scanner, Integrated cath lab, Avalon FM 20 & FM 30 fetal monitors, Ambient Experience MR and CT systems, Philips Lifeline's personal emergency alert service.Quality EngineeringJob DescriptionPRIMARY OBJECTIVE: The following is considered with the major focus being on product and process quality assurance. As one of several Quality Engineers in the Quality Assurance department, works with other Quality Engineers to provide consulting support in the role of QE project lead for sustaining and new product manufacturing production and test equipment processes. As Quality Engineer lead, plans, conducts and oversees engineering assignments, estimating engineering personnel needs as they relate to CAPA investigations, NPD project support, manufacturing support, process FMEA and V&V support, and test equipment hardware and software qualifications for product development and manufacturing process projects. Schedules work to meet completion dates and technical specifications. Coordinates engineers and technicians assigned to projects and maintains liaison with various departments as necessary to achieve team support and milestone completions. Reviews progress, evaluating and reporting results. Makes and/or plans changes in methods, design or equipment where necessary. Generally operates with appreciable latitude for un-reviewed action or decision. MAJOR DUTIES AND RESPONSIBILITIES: 1. Provides support, leadership and guidance on the Quality System, specifically as it pertains to the Quality System Regulations and per defined procedures; 2. Acts in coordination and support for Corrective and Preventive actions as they pertain to assigned area(s), ensuring investigations through to root cause in concert with other departments (i.e. Engineering, Manufacturing, etc.); 3. Consults and provides guidance to other department personnel, Design, Process Control and Manufacturing Engineers, on the use of Quality Assurance tools, ensuring robust quality systems throughout the lifecycle of production test equipment; 4. Supports Quality System Compliance by performing internal audits of the Quality System as assigned.Requirements1. BS in Engineering or related technical discipline. 2. Minimum 5 years experience in manufacturing/development environments, with at least 3 years in medical device or other FDA regulated industries. 3. requires strong working knowledge of QSR/ISO requirements. 4. Requires strong working knowledge of quality assurance principles and practices, industry and international safety standards; 5. Must possess excellent communication (verbal & written) skills and analytical problem solving skills; 6. Working knowledge of various software packages including Microsoft (Excel, Word, Project, Access) and SAP applications is desirable.Philips is an equal opportunity employer.Job ID: 63854.

Job Title: DfX Engineer Company: Volt Workforce Solutions Location: Redmond, WA Description: This position reports to the DfX Manager and requires interaction with a wide range of disciplines.Scope of Responsibilities/Expectations:DfX is a critical component in the realization of the E2E concurrent Engineering approach used for hardware Product Development within E&D. Design for manufacturability, assembly, test, sourcing and reliability are a few of the many facets of DfX that are considered and managed as part of the development process.The DfX Engineer is part of the technical team that manages the integration of DfX activities into the hardware Product Development schedule. This assures that each product developed sets new standards in terms of quality, reliability, manufacturability and COG sensitivity.As a member of the team, the DfX Engineer will be involved with any number of hardware products under development in product groups such as game consoles and PC Hardware.Due to the file size of most portfolios, please do not email samples along with your resume/application - this will be requested at the time a Recruiter contacts you.This is an estimated 6-12 month contingent/temporary position through Volt Technical & Creative Communication - a division of a Fortune 1000 publicly traded Staffing Industry Leader, which is headquartered in Bothell, Washington. We are among the largest IT staffing companies in the US for contract/temporary and direct hire placements and support most of the top rated IT companies in the Pacific Northwest.Requirements: Required Skills for this DfX Engineer position include the following:This position requires a strong technical aptitude, including:An excellent understanding of DfX methodologiesHigh-volume Electronics Manufacturing processesPrinted Circuit Board technologyComponent SelectionTest and Inspection MethodologiesQuality AssuranceConsumer Electronics Product DevelopmentThe successful candidate will be able to draw from industry experience to:Provide technical guidancePerform Physical and Statistical AnalysisRecommend and prepare design-of-experimentsCharacterize process/design interactionsReview Component and Product Design SpecificationsAnalyze Mechanical and Electrical Design informationDraft/edit specifications and technical guidelinesAdditional Significant RequirementsBS/MS in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, Material Science Engineering and/or Physics 8+ years of automated, high-volume Manufacturing Engineering experience involving Printed Circuit Board Assembly (SMT and through-hole) and mechanical systems integration in the Consumer Electronics industry; hands-on process experience mandatoryKnowledge of typical PCBA and product level failure modes (production and field); ability to relate failure mode to process, material and design-related stressorsDemonstrated experience working as a member of a Product Development Engineering team, either as a Hardware Design Engineer or as a Manufacturing Engineer where a systematic design for manufacturing, design for test, and design for service approach was used and/or adoptedDemonstrated experience in Product/Process Characterization Using Techniques such as FEA, Strain Analysis, Cost Modeling, DOE, Yield and Defect Data AnalysisDemonstrated experience in Root Cause Analysis of consumer electronics products using techniques such as FTA, Ishikawa, DFMEA, PFMEA and Cause MappingPrinted Circuit Board layout or fabrication experience/knowledge, proficiency with PCB CAD layout and/or viewing softwareProficiency in:Statistical Analysis Techniques and Data Reporting using Analysis Software such as JMP or MinitabThe use of Microsoft Office products; i.e. Word, Excel, Visio and PowerPoint with specific experience in Technical Presentation Preparation, Process Flowcharting, Technical Specification Authoring and Spreadsheet ManipulationExperience working with or for Tier 1 contract manufacturersFamiliarity with industry standards (i.e. IPC, JEDEC, IEEE, EIA, etc.)Reliability and/or quality Engineering experience a plusInstructions to begin the process:Due to the file size of most portfolios, please do not email samples along with your resume - this will be requested at the time a Recruiter contacts you.Email your resume to Volt at: Register to View and it will be expedited to the Recruiter assigned to this position.Please use the entire job posting number in your subject line to ensure it gets routed to the correct Recruiter: Register to View -12-256739, also include the website name where you saw this posting listed.Call Volt at the number listed on this posting; inform the Receptionist that you would like to speak with the Recruiter responsible for this posting and give the Receptionist the job number of 256739.Volt has a talented and optimistic staffing team focused on the quality of your career.Volt is a world leader in the staffing industry, boasting over 50 years of experience. We work with many of the Fortune 500 and 1000 companies to provide workforce solutions. We offer many direct hire full-time positions as well as contract positions; offering our contractors competitive pay and benefits, as well as education programs and re-deployment assistance.Volt Information Sciences, Inc. is our parent company and is a publicly owned corporation. Stock is traded over-the-counter and is quoted on the NYSE. To learn more about Volt Information Sciences, please visit: http://www.volt.com and to see more of our job postings, please visit: http://jobs.volt.com Volt is an Equal Opportunity Employer and is dedicated to fostering diversity in the workplace.

Job Title: Tooling Engineer Company: Hexcel Corporation Location: Kent, WA Description: Tooling Engineer Description With our strong investment in research and development, and culture of continuous improvement, Hexcel is the industry leader in the manufacturing of industrial fabrics and composite materials. Over 4,500 people work for Hexcel at various manufacturing sites, sales offices and R&T centers around the globe??we call them our ?Strength Within?.Hexcel is seeking a Tooling Engineer in our Kent, WA location.Position description:A well rounded Toolmaker or Machinist with proven Supervisor experience, to manage the Tooling Department within Kent.Essential Duties & Responsibilities:? Interfacing with other disciplines, internal and external to Hexcel, for the purpose of analyzing tool requirements, fabricating tools, and solving tool related problems.? Provide detailed Statements of Work for Tooling projects and Tool changes? Generate and evaluate tool requests for quotation to determine supplier selection? Provide liaison engineering support and manage tool vendor performance? Estimating tool fabrication hours and participating in resource scheduling.? Ensures that all aspects of Hexcel generated tool orders meet the quality requirements as defined by Hexcel and Hexcel?s customers.? Generates tool orders for tool repair/rework and is able to define root cause of, and disposition, tooling non-conformances.? Tracking of program and product action items and takes necessary steps to ensure they are accomplished.? Provide technical assistance to various organizations, troubleshoot manufacturing and producibility issues for our customers/suppliers, and provide liaison support between them and Hexcel.? Act as liaison between Tool Design, Tool Fabrication, Tooling Vendors, Manufacturing Engineering, Quality and Operations Position Requirements Position requirements:? Bachelors degree from an accredited college or university in Engineering, Manufacturing Engineering or a related and applicable discipline.? 10+ years work experience in the tooling or aerospace field.? Supervisory experience, managing groups of people in manufacturing, tooling or project environments? Customer service-oriented approach, responds to requests with a sense of urgency.? Proactive, self-motivated, able to recognize issues and resolve or escalate appropriately.? Strong people skills, recognizes when to use formal or informal approach, not easily intimidated, accessible, ability to say ?no? in a firm but polite manner.? High degree of honesty, ethics and integrity.? Able to work sitting or standing and to move freely throughout the facility? Demonstrated ability to manage details and meet deadlines with 100% accuracy in a multi-task environment.? Strong computer skills including MS Office, required familiarity with CAD systems? Experience or familiarity with CNC machining requirements and computare aided inspection methods for tooling.Eligible candidate must be a U.S. citizen, U.S. national, a person lawfully admitted for permanent residence, a temporary resident under sections 210(a) or 245(A) of the Immigration and Nationality Act, a person admitted in refugee status, or a person granted asylum. Hexcel is an Equal Opportunity Employer.Hexcel is a NYSE listed international producer of composite materials, reinforcements and structures serving commercial aerospace, space & defense, electronics and various industrial markets. The company is a leader in the production of honeycombs, prepregs and other fiber reinforced matrix systems, woven and specialty reinforcements, carbon fibers and aircraft structures. Hexcel materials are used in thousands of products, making everyday life easier and safer for millions of people around the world. The lightweight, tailorable nature of our materials has helped transform numerous industries over the past 55 years by making products lighter, stronger and faster. We are the strength within many of today?s lightweight, high-performance products.Apply Online at www.hexcel.appone.com